Bolt On Hidden Tow Hitch - 2788147

Bolt On Hidden Tow Hitch

• All Sir Michaels tow hitches are designed to fit behind Sir Michaels steel roll pans. Altough some hitches will work with other manufactures roll pans.

• This hitch will bolt to the factory holes on each side of the frame.

• Install the hitch by sliding it up to the frame from the bottom, install the frame plates included (see diagram ?A?) your hitch will bolt to the bottom & side of the frame rails using the grade 8 hard ware supplied.

• Once all bolts are installed, tighten them down to the factory specs. Your hitch can now be accessed behind the license plate with a license plate flip, sold separately.

• Sir Michaels does not supply a hitch wire plug and tow receiver due to the many different connections and drops. Most trailer and auto parts will carry those items.

• This hitch is not designed for use with lifted trucks or with use of drop receivers larger than a four inch drop. Use of larger drop receiver will void warranty.

• Short beds using a hidden hitch will need to down size your spare tire.

To find the maximum size spare tire install your hitch and spare tire relocater.
Extend the tire hoist cable and take a measurement from the cable to the back of hidden hitch then from hoist cable to the rear end housing or sway bar which ever is closer to the cable. Take the shortest distance times two and subtract four, this will give you the maximum overall tire size you can run.

[SIR2788147]