Power Stop Friction Z36 Truck & Tow Brake Pads - Rear - Z36-834

Friction Z36 Truck & Tow Brake Pads, Rear

Power Stop Z36 Friction Brake Pads

Power Stop�s Z36 formula offers enormous brake output for your SUV or truck under full load. The Z36 metallic pad is designed for thermal stability to give you the confidence to stop under severe conditions and prevent rotor warping. Whether you drive in the hills, haul loads or tow trailers, brake safely with Z36. Compared to the competition, Z36 pads have the highest pad bite (coefficient of friction) through the entire pedal pressure range.

Power Stop Z36 pads hold a high coefficient of friction (Mu) over a wide temperature range even when the rotors are glowing orange at 1200 degrees F. The leading competitive pads show significant brake fade as Mu deteriorates at higher brake temperatures. During a severe highway stop, your rotors can exceed 900 F. Results vary depending on vehicle type.

Pedal pressure sensitivity is a critical characteristic for friction performance. The pad should hold a relatively constant friction coefficient (Mu) at any pedal pressure. The Power Stop Z series pads are highly resistant to brake fade. Leading competitive pads show lower pad bite at high pedal pressure. Results vary depending on vehicle type.

Independent dynamometer test results confirms that the Power Stop Z26 and Z36 brake pads stop 6 to 30 feet shorter than leading competitive pads. These tests were run at an initial rotor temperature of 500 Centigrade. Results vary depending on vehicle type.

Slotted and drilled rotors will accelerate pad wear up to 20%. Power Stop metallic pads give you more pad for the money, lasting up to 3 times longer than other leading brands. Power Stop pads are also easy on your rotors to prevent grooving. Results vary depending on vehicle type.

[PSTZ36834]