Home - Return to Previous Page
260mm OD / 34 H / 23 THK / 4 Bolt
Fits: 1997-1998 Acura CL 2DR 2.2L
SP Performance Cross Drilled and Slotted Brake Rotors
Maximum air circulation for increased cooling Increased brake pad bite Faster release of brake pad gases Improved wet weather braking Reduced fade Increased Safety and Reliability Runs cool... Looks cool
SP Performance Cross-Drilled and Slotted Brake Rotors are a unique design offering the best combination of cooling and out-gassing. In fact, our design is so unique we would like to go over some of the details. The first thing we will point out on the drilled rotor is the chamfer. Unlike our competition there is no edge on our chamfer. This is accomplished by the use of an outer radius curve rather than a countersink. With the radius curve, or Sinusoid Curve", it virtually eliminates an edge on the surface of the hole. With no edge, there is less stress build up, thus reducing the chance of surface checking. This smooth surface also makes the rotor more pad friendly by reducing the wear of the pad caused by the friction scraping against a sharp edge
Available in these options:
SP Performance Drilled and Slotted Brake Rotors With Standard Gray ZRC Finish:
All rotors are provided with our gray ZRC coating. It provides long-lasting protection against corrosion in the most hostile salt-water environments. After being applied, ZRC provides the highest level of galvanic protection. The film of ZRC is conductive. After the coating heats up during use, it bonds permanently to the metal surface. It will not allow the metal to corrode, even when the surface is scratched
SP Performance Drilled and Slotted Brake Rotors With Optional Bright Silver Plating:
Electro- plating is performed on our rotors to provide a brighter finish which is more appealing to the look of the rotor. When plating a rotor, a metallurgical bond is formed between the plating and steel, forming an iron rich alloy with tenacious bond where it will form its own protective oxide layer. Electro- plating is very effective in combating the corrosion of the rotor.
Acura CL SP Performance Cross Drilled and Slotted Vented Front Rotors - F19-2424
Chevrolet Silverado SP Performance Diamond Slot Vented Rear Rotors - D55-086
D55-086
260mm OD / 34 H / 23 THK / 4 Bolt
Fits: 1997-1998 Acura CL 2DR 2.2L
SP Performance Cross Drilled and Slotted Brake Rotors
SP Performance Cross-Drilled and Slotted Brake Rotors are a unique design offering the best combination of cooling and out-gassing. In fact, our design is so unique we would like to go over some of the details. The first thing we will point out on the drilled rotor is the chamfer. Unlike our competition there is no edge on our chamfer. This is accomplished by the use of an outer radius curve rather than a countersink. With the radius curve, or Sinusoid Curve", it virtually eliminates an edge on the surface of the hole. With no edge, there is less stress build up, thus reducing the chance of surface checking. This smooth surface also makes the rotor more pad friendly by reducing the wear of the pad caused by the friction scraping against a sharp edge
Available in these options:
SP Performance Drilled and Slotted Brake Rotors With Standard Gray ZRC Finish:
All rotors are provided with our gray ZRC coating. It provides long-lasting protection against corrosion in the most hostile salt-water environments. After being applied, ZRC provides the highest level of galvanic protection. The film of ZRC is conductive. After the coating heats up during use, it bonds permanently to the metal surface. It will not allow the metal to corrode, even when the surface is scratched
SP Performance Drilled and Slotted Brake Rotors With Optional Bright Silver Plating:
Electro- plating is performed on our rotors to provide a brighter finish which is more appealing to the look of the rotor. When plating a rotor, a metallurgical bond is formed between the plating and steel, forming an iron rich alloy with tenacious bond where it will form its own protective oxide layer. Electro- plating is very effective in combating the corrosion of the rotor.
Was:
$319.99
Sale:
$255.99
Save:
20%
Save:
$64.00
Description
329.9mm OD / 85.6 H / 29 THK / 8 Bolt
Fits: 2004-2004 Chevrolet Silverado 2500 4 Wheel Steering
Fits: 2004-2004 Chevrolet Silverado 2500 4 Wheel Steering
Installation
Professional Installation is Recommended.
Chevrolet Silverado SP Performance Diamond Slot Vented Rear Rotors - D55-086 Fits:
2004-2004 Chevrolet Silverado 2500 4 Wheel Steering
Chevrolet Silverado SP Performance Diamond Slot Vented Rear Rotors - D55-086 Fits:
Details
- D55-086
- D55-086
- SP Performance
- New
Categories
Shipping Information
- Item Requires Shipping
- $56.99